# Can I mix alcohol-based androsterone into my Royale A314 oil? **URL:** \ **Category:** Men's Pheromone Advice & Field Reports\ **Created:** [October 11, 2015, 6:47pm UTC](https://pheromonetalk.com/t/can-i-mix-alcohol-based-androsterone-into-my-royale-a314-oil/65043 "2015-10-11T18:47:13Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![SpikeSpiegel](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SpikeSpiegel](https://pheromonetalk.com/u/SpikeSpiegel)\ **Post date:** [October 11, 2015, 6:47pm UTC](https://pheromonetalk.com/t/can-i-mix-alcohol-based-androsterone-into-my-royale-a314-oil/65043/1 "2015-10-11T18:47:13Z")
Hello, I hope this is in the right place. Sorry if it’s not. I have the Royale A314 oil and it didn’t seem to work very well for me on it’s own, so I’ve been trying different combinations with it. I layered it with androsterone that I have in an ethanol solution and I liked the results a lot better. So I was thinking about mixing them in the bottle. I wanted to ask, since there’s lot’s of people here who seem to have loads of experience with mixing things: would it be a problem to mix the alcohol into the oil and would I need to change the ratio’s to get proper diffusion? Thanks for any help. This forum is great, but it seems that everyone who knows a lot about these things talks about them like the people reading also do, and unfortunately I do not yet… ---
**Author:** ![justintime469](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/justintime469/32/1402_2.png) [@justintime469](https://pheromonetalk.com/u/justintime469)\ **Post date:** [October 12, 2015, 3:15am UTC](https://pheromonetalk.com/t/can-i-mix-alcohol-based-androsterone-into-my-royale-a314-oil/65043/2 "2015-10-12T03:15:39Z")
I haven’t tried mixing alcohol and oil bases together. Mobocaster or Pagodeiro are the ones you may want to contact on here as I know either one can answer your questions. There are other members that can answer to these 2 just came to my mind. Good luck ---
**Author:** ![Smellymen2002](https://avatars.discourse-cdn.com/v4/letter/s/858c86/32.png) [@Smellymen2002](https://pheromonetalk.com/u/Smellymen2002)\ **Post date:** [October 12, 2015, 4:42pm UTC](https://pheromonetalk.com/t/can-i-mix-alcohol-based-androsterone-into-my-royale-a314-oil/65043/3 "2015-10-12T16:42:51Z")
I’m personally against mixing oil and alcohol in a bottle. They have differnt diffusion rates for one. If I want to wear A314 with another product I will put the oil on one side if my neck or arms and then the alcohol on the the other side.'this ensures that the diffusion rate is consistent. ---
**Author:** ![mobocaster](https://avatars.discourse-cdn.com/v4/letter/m/c2a13f/32.png) [@mobocaster](https://pheromonetalk.com/u/mobocaster)\ **Post date:** [October 12, 2015, 5:21pm UTC](https://pheromonetalk.com/t/can-i-mix-alcohol-based-androsterone-into-my-royale-a314-oil/65043/4 "2015-10-12T17:21:07Z")
Yes, mixing or overspraying oil with alcohol can completely wreck diffusion. Causing a short-term, OD-level burn-off of the A314 due to the difference in dosing for oils that falls-off dramatically in no-time. Layering sprays, leaving a couple of minutes for them to dry down but keeping the oil app apart (but nearby) is the way forward here. 🙂 Also avoid layering-in cover scents with phero-damaging antibacterials like Triclosan - Cheap colognes, cheap deos, shower gels etc tend to be laden with the stuff. Good quality colognes/cosmetic products tend to be free of them. Wood oils need to be watched too as many have strong antibacterial properties. ---
**Author:** ![SpikeSpiegel](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SpikeSpiegel](https://pheromonetalk.com/u/SpikeSpiegel)\ **Post date:** [October 14, 2015, 4:53pm UTC](https://pheromonetalk.com/t/can-i-mix-alcohol-based-androsterone-into-my-royale-a314-oil/65043/5 "2015-10-14T16:53:27Z")
Oh I didn’t even think about the oil diffusing faster because of the alcohol. Id been putting them on the same application point so I’ll stop that lol. Thanks