# Diffusion properties of Scented perfumer's alcohol

**URL:** <https://pheromonetalk.com/t/diffusion-properties-of-scented-perfumers-alcohol/57870>\
**Category:** Men's Pheromone Advice & Field Reports\
**Created:** [January 16, 2013, 4:09am UTC](https://pheromonetalk.com/t/diffusion-properties-of-scented-perfumers-alcohol/57870 "2013-01-16T04:09:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GorchFock](https://avatars.discourse-cdn.com/v4/letter/g/90ced4/32.png) [@GorchFock](https://pheromonetalk.com/u/GorchFock)\
**Post date:** [January 16, 2013, 4:09am UTC](https://pheromonetalk.com/t/diffusion-properties-of-scented-perfumers-alcohol/57870/1 "2013-01-16T04:09:34Z")

</div>

A1 is definitely one of my favourite [pheromones](https://pheromonelabs.com/), thus I’m always looking for ways to apply it to the best effect. I’m not much of a cologne-guy and try to avoid multiple scents/lots of sprays as best as possible.

Most of the time I use A1 in conjunction with Ammo and A314-spray version, therefore mix it with Ammo in to-go bottles.

Now I often read that, while mixing A1 IN Ammo is entirely viable, layering is the superior way to mix pheromones.  
So I went and bought Akuto-scented Perfumer’s alcohol to dilute A1 with. (Same scent as in A314 spray).

Will this provide a good diffusion rate?

Also, I’d like to layer a spray of Akuto-A1 over a spray of Ammo, since I like how mixing both scents seems to cut of the citrus-tops of FF21 while lightening up the Akuto, making it to me a more harmonius odor.

I understand that FF21 is one of the best diffusers available, will layering my Akuto/A1 mix over it profit from those properties/diffuse even better?

Thanks for your advise!

---

<div class="post-metadata">

**Author:** ![eibmoz](https://avatars.discourse-cdn.com/v4/letter/e/bc8723/32.png) [@eibmoz](https://pheromonetalk.com/u/eibmoz)\
**Post date:** [January 16, 2013, 1:30pm UTC](https://pheromonetalk.com/t/diffusion-properties-of-scented-perfumers-alcohol/57870/2 "2013-01-16T13:30:17Z")

</div>

Perfumer’s alcohol on its own evaporates quickly, so if making a A1 spray i would mix ~10% DPG or FCO into the PA.
