# First use report: Ammo, TUTH; Question on mixing? **URL:** \ **Category:** Men's Pheromone Advice & Field Reports\ **Created:** [January 23, 2012, 4:03am UTC](https://pheromonetalk.com/t/first-use-report-ammo-tuth-question-on-mixing/54305 "2012-01-23T04:03:39Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![mobocaster](https://avatars.discourse-cdn.com/v4/letter/m/c2a13f/32.png) [@mobocaster](https://pheromonetalk.com/u/mobocaster)\ **Post date:** [January 23, 2012, 9:28am UTC](https://pheromonetalk.com/t/first-use-report-ammo-tuth-question-on-mixing/54305/3 "2012-01-23T09:28:45Z")
> [@Arkios](#): > > First off, my question- I’m interested in make a personalized party / pick-up mix after I experiment with the different 'mones I’ve just ordered. I’ve purchased an extra empty to-go spray bottle and some pipettes. Would it be alright to take measured ratios of the different products, and mix them in one spray bottle for personal use? > > Right now for a party / pick-up mix, I’m thinking something along the lines of: > 1 part A314 (spray version 1.29B); 3 parts Ammo; 3 parts MX390; 3 parts IS. I still need to experiment with them before I make it official, but this is what I’m shooting for. > > Part 2 to this question, is ‘How much of something like this should I use’? That formula above is 10 parts total. So with something like that, should I start with 10 sprays spread across various points and fine tune it from there? > > BTW I ordered the A314 in spray form, because 1) I’m not sure if I want to throw down the $100 for the oil just yet, and 2) I’m not sure if it would be okay to mix the oil A314 with the spray 'mones together in a spray bottle. Instead of mixing them together in a togo, which leaves you with a then unchangable mix that may or may not be useful, you should layer the spray pheros over each other straight from the bottles, leaving a couple of minutes for each layer to dry down. Have a read of this: > [@Your Skin is a Pheromone Mixing Canvas](https://pheromonetalk.com/t/your-skin-is-a-pheromone-mixing-canvas/34388): > > July 24th, 2009, 02:01 PM In the late 90s, with Erox advertising heavily on the radio, I first tried these products. I had always written off pheromones as much as I would astrology (bad astrology from carnies, anyway), but I figured if they were spending so much to advertise such a product, it might be worth a shot. And hey, it’s even available in normal department stores. I don’t have to call a 900# or go to a strange, smelly sex shop or anything fishy. So I tried the product. Did smashingly… That way, you can vary the proportions more easily as you go along - eg adding TUTH when going into a more appropriate/sexually charged environment, or softening an overt mix with IS if needed. And you **do not** mix oil with alc-base or apply one over the other, as you will wreck the diffusion of both. Keep these app points apart. As for your mix - Personally, I’ve found anything involving A314 and [MX297](https://a314.com/product/mx297/)/390 together to be highly unproductive. Just sends a confusing signal that failed totally around people who had previously responded very well to one or the other. I’m left wondering if the rone in the A314 might not sit well with the 297/390? Although Ammo has rone, it is also better balanced and lower proportion to begin with. TBH, for sexuality with 297/390, I found TUTH or even plain androstenone the best and least disturbing addition. IS goes well with all of these. 🙂 As for dose - we can’t tell you that! This is where you need to do a little legwork tourself to see what sits best with your body chemistry, personality and social situations. Once you have an idea for your major components, it then becomes much easier to determine how they might work together. --- _[View the full topic](https://pheromonetalk.com/t/first-use-report-ammo-tuth-question-on-mixing/54305)._