# How to PROPERLY make ICM (MX301) **URL:** \ **Category:** Men's Pheromone Advice & Field Reports\ **Created:** [October 13, 2010, 5:52pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595 "2010-10-13T17:52:45Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![SteveO](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@SteveO](https://pheromonetalk.com/u/SteveO)\ **Post date:** [October 13, 2010, 5:52pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/1 "2010-10-13T17:52:45Z")
Link is from deleted thread This is ICM and this is how you make it. All 30 mL bottles at the mcg listed You must have an additional CLEAN NEW 30 ML bottle and individual pipettes for each molecule. You DO NOT reuse these! TAA ----\>30 mcg ----\>72 drops = 3.974 mcg per spray BNOL ----\>30 mcg ----\>90 drops = 4.967 mcg per spray (ANOL can be sustituted if you choose) P93 ----\>20 mcg ----\>48 drops = 1.766 mcg per spray [P74](https://a314.com/product/p74/) ----\>30 mcg ----\>55 drops = 3.035 mcg per spray NONE----\>30 mcg ----\>92 drops = 5.077 mcg per spray TAC ----\>30 mcg ----\>96 drops = 5.298 mcg per spray TOTAL = 11.325 mL (double drops if you like - tripling will not fit in bottle!) Make sure all your molecules are scented the same way. Do NOT REUSE pipettes or old empty bottles. Clean everything in the room with lysol. Ventilation is key. Wear rubber gloves and preferable if you have a mask. This is my PRIVATE mix and this is how I made it without any of the upgrades I put into it now. Yes it absolutely matters if you make it correctly. 48 drops means sitting there and dropping 48 times out of a pipette. 5.298 means 5.298 and not 5.25. There is a big difference. I will not release my oil mixes and I am not going to consult with anyone on how to mix by opening bottles. I must reemphasize this is my personal knowledge and has nothing to do with androtics\> am sharing it freely with you as a member of Pherotalk community and not as a representative in any official capacity. All risks you take are completely your own as with any damages you incur. This formula remains my property and is not to be shared anywhere else without my express written permission. Yes I really do mean that and yes I will go after you. Thanks and enjoy ---
**Author:** ![TheBoogieMan](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/theboogieman/32/1136_2.png) [@TheBoogieMan](https://pheromonetalk.com/u/TheBoogieMan)\ **Post date:** [October 13, 2010, 6:22pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/2 "2010-10-13T18:22:18Z")
You’re the man, Steve. Reps. _calls Russian government intelligence agency from phone disguised as shoe_ "Yes! I’ve obtained the schematics…the puny Americans will tremble at our feet. Mwahahahaha—"_is punched out by Steve_ ---
**Author:** ![Maidenfan01](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@Maidenfan01](https://pheromonetalk.com/u/Maidenfan01)\ **Post date:** [October 13, 2010, 7:54pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/3 "2010-10-13T19:54:41Z")
This means my MX301 is a mutant, thats ok though because its still pretty solid. Thanks steve! ---
**Author:** ![RADMAN513](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/radman513/32/364_2.png) [@RADMAN513](https://pheromonetalk.com/u/RADMAN513)\ **Post date:** [October 13, 2010, 7:57pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/4 "2010-10-13T19:57:21Z")
Those numbers are pretty different from the formula I’ve read before, which one is the actual MX 301 that was sold? ---
**Author:** ![GT1](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/gt1/32/455_2.png) [@GT1](https://pheromonetalk.com/u/GT1)\ **Post date:** [October 13, 2010, 8:21pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/5 "2010-10-13T20:21:08Z")
Thanks Steve you’re the man! This is the best mix guide yet. When I get rich and own all of those at the right mcgs I’ll have to try it out haha. ---
**Author:** ![SteveO](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@SteveO](https://pheromonetalk.com/u/SteveO)\ **Post date:** [October 13, 2010, 8:54pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/6 "2010-10-13T20:54:19Z")
> [@RADMAN513](#): > > Those numbers are pretty different from the formula I’ve read before, which one is the actual MX 301 that was sold? Well its supposed to be this, but because when you’re producing stuff for the masses you can’t just sit there and do one drop at a time, they made it so all the numbers were whole. My belief and proven so by usage of both MX301 and ICM 1A is that those little differences make a HUGE difference results wise. Of course there are also members on here that know nothing about mixing, and spread misinformation on how to do what they are doing as if they were experts. Sad really and leads to mass confusion. One guy told me if you order 25 mcg of everything in 5 ml and pour them all into a 30 ml you get ICM. Not even close!:o What you would get is 3.472 mcg per spray of all 6 molecules across the board. This comes from lack of experience and a complete lack of understanding on how mixing works. Perhaps lazy man disease!🙄 ---
**Author:** ![P51Mustang](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/p51mustang/32/1266_2.png) [@P51Mustang](https://pheromonetalk.com/u/P51Mustang)\ **Post date:** [October 13, 2010, 9:02pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/7 "2010-10-13T21:02:55Z")
> [@Steve](#): > > `http://www.pheromonetalk.com/mens-pheromone-advice-tricks-tips/future-pheromone-universe-i-seek-your-9175.html` > > This is ICM and this is how you make it. > All 30 mL bottles at the mcg listed > You must have an additional CLEAN NEW 30 ML bottle and individual pipettes for each molecule. You DO NOT reuse these! > > TAA ----\>30 mcg ----\>72 drops = 3.974 mcg per spray > BNOL ----\>30 mcg ----\>90 drops = 4.967 mcg per spray (ANOL can be sustituted if you choose) > P93 ----\>20 mcg ----\>48 drops = 1.766 mcg per spray > P74 ----\>30 mcg ----\>55 drops = 3.035 mcg per spray > NONE----\>30 mcg ----\>92 drops = 5.077 mcg per spray > TAC ----\>30 mcg ----\>96 drops = 5.298 mcg per spray > > TOTAL = 11.325 mL > (double drops if you like - tripling will not fit in bottle!) > > Make sure all your molecules are scented the same way. Do NOT REUSE pipettes or old empty bottles. Clean everything in the room with lysol. Ventilation is key. Wear rubber gloves and preferable if you have a mask. > > This is my PRIVATE mix and this is how I made it without any of the upgrades I put into it now. Yes it absolutely matters if you make it correctly. 48 drops means sitting there and dropping 48 times out of a pipette. 5.298 means 5.298 and not 5.25. There is a big difference. > > I will not release my oil mixes and I am not going to consult with anyone on how to mix by opening bottles. I must reemphasize this is my personal knowledge and has nothing to do with androtics\> am sharing it freely with you as a member of Pherotalk community and not as a representative in any official capacity. All risks you take are completely your own as with any damages you incur. This formula remains my property and is not to be shared anywhere else without my express written permission. Yes I really do mean that and yes I will go after you. > > Thanks and enjoy I think you left out the formula part of ICM 2.0?? ---
**Author:** ![whs06c](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/whs06c/32/2142_2.png) [@whs06c](https://pheromonetalk.com/u/whs06c)\ **Post date:** [October 13, 2010, 9:03pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/8 "2010-10-13T21:03:21Z")
instead of mixing them in a bottle, would it be possible if one would simply spray the contents on the skin? Like for instance, If I wanted 1 spray of mx301 equivalent, I would use the following sprays: 1 TAC (5mcg/spray), 1 NONE(5mcg/spray), 1 P74(5mcg/spray), 1 Bnol(5mcg/spray), 1 TAA(5mcg/spray), and 1 [P93](https://a314.com/product/p93/)(2.5mcg/spray). Keep in mind the p93 and TAA might not be accurate, but very close to the requirements. ---
**Author:** ![P51Mustang](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/p51mustang/32/1266_2.png) [@P51Mustang](https://pheromonetalk.com/u/P51Mustang)\ **Post date:** [October 13, 2010, 9:05pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/9 "2010-10-13T21:05:05Z")
> [@whs06c](#): > > instead of mixing them in a bottle, would it be possible if one would simply spray the contents on the skin? Like for instance, If I wanted 1 spray of mx301 equivalent, I would use the following sprays: 1 TAC (5mcg/spray), 1 NONE(5mcg/spray), 1 P74(5mcg/spray), 1 Bnol(5mcg/spray), 1 TAA(5mcg/spray), and 1 P93(2.5mcg/spray). > > Keep in mind the p93 and TAA might not be accurate, but very close to the requirements. Look at this > [@](#): > > 5.298 means 5.298 and not 5.25. There is a big difference. ---
**Author:** ![SteveO](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@SteveO](https://pheromonetalk.com/u/SteveO)\ **Post date:** [October 13, 2010, 9:13pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/10 "2010-10-13T21:13:23Z")
> [@whs06c](#): > > instead of mixing them in a bottle, would it be possible if one would simply spray the contents on the skin? Like for instance, If I wanted 1 spray of mx301 equivalent, I would use the following sprays: 1 TAC (5mcg/spray), 1 NONE(5mcg/spray), 1 P74(5mcg/spray), 1 Bnol(5mcg/spray), 1 TAA(5mcg/spray), and 1 P93(2.5mcg/spray). > > Keep in mind the p93 and TAA might not be accurate, but very close to the requirements. That’s the encouraged way of making your own mix as per Mr Michael Harris himself. I would also suggest mixing and matching with things like [P83](https://a314.com/product/p83/) in there, maybe Bnol one day and Anol the next. You might add some TAK once in a while too (thats all a hint too). So yes you can absolutely do that and it would be OK. I encourage you to make mixes using your skin as a canvas. This post is simply designed to let other users know EXACT mixing criteria for ICM. ICM is old and outdated now. We want new members to come along and make new mixes. This is just for those die-hards who are not willing to mix anything for themselves. I just wanted to clear up that confusion, but HELL YEAH, you are dead on right about the skin. ---
**Author:** ![Pagodeiro](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/pagodeiro/32/1226_2.png) [@Pagodeiro](https://pheromonetalk.com/u/Pagodeiro)\ **Post date:** [October 13, 2010, 9:20pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/11 "2010-10-13T21:20:38Z")
> [@Steve](#): > > TAA ----\>30 mcg ----\>72 drops = 3.974 mcg per spray > BNOL ----\> **30 mcg ----\>90 drops = 4.967 mcg per spray** (ANOL can be sustituted if you choose) > P93 ----\>20 mcg ----\>48 drops = 1.766 mcg per spray > P74 ----\>30 mcg ----\>55 drops = 3.035 mcg per spray > NONE----\> **30 mcg ----\>92 drops = 5.077 mcg per spray** > TAC ----\>_30 mcg ----\>96 drops = 5.298 mcg per spray_ something went wrong with the maths or why give 56 drops 5,298mcg per spray and 92 drops 5,077mcg per spray ? thanks Pago ---
**Author:** ![whs06c](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/whs06c/32/2142_2.png) [@whs06c](https://pheromonetalk.com/u/whs06c)\ **Post date:** [October 13, 2010, 9:20pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/12 "2010-10-13T21:20:54Z")
thanks for the feedback. I got really confused when all of the numbers popped up. ---
**Author:** ![SteveO](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@SteveO](https://pheromonetalk.com/u/SteveO)\ **Post date:** [October 13, 2010, 9:51pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/13 "2010-10-13T21:51:25Z")
> [@Pagodeiro](#): > > something went wrong with the maths or why give 56 drops 5,298mcg per spray > and 92 drops 5,077mcg per spray ? > > thanks > > Pago Sorry it wasn’t 56 for TAC it was 96 which I just changed: Typo ---
**Author:** ![CoolKat](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/coolkat/32/501_2.png) [@CoolKat](https://pheromonetalk.com/u/CoolKat)\ **Post date:** [October 13, 2010, 9:55pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/14 "2010-10-13T21:55:21Z")
does this mean, Androtic isn’t selling MX301 anymore? Now, do we have to make our own? lol ---
**Author:** ![P51Mustang](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/p51mustang/32/1266_2.png) [@P51Mustang](https://pheromonetalk.com/u/P51Mustang)\ **Post date:** [October 13, 2010, 10:31pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/15 "2010-10-13T22:31:18Z")
> [@CoolKatDC](#): > > does this mean, Androtic isn’t selling MX301 anymore? Now, do we have to make our own? lol That’s what John said. I believe it was something along the lines of out with the old, in with the new. But in all seriousness. The results and effects of these mixes have been tested enough and it’s time to move on. Move onto what though? ---
**Author:** ![CoolKat](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/coolkat/32/501_2.png) [@CoolKat](https://pheromonetalk.com/u/CoolKat)\ **Post date:** [October 13, 2010, 10:33pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/16 "2010-10-13T22:33:02Z")
> [@P51Mustang](#): > > That’s what John said. > > I believe it was something along the lines of out with the old, in with the new. > > But in all seriousness. The results and effects of these mixes have been tested enough and it’s time to move on. > > Move onto what though? Oh well, I better use mine carefully… Will bust it out on special occasions, hehe… I don’t feel like making my own mixes. P.S. I dont want to breathe in that crap and have seizures, lol ---
**Author:** ![thundercat](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/thundercat/32/2345_2.png) [@thundercat](https://pheromonetalk.com/u/thundercat)\ **Post date:** [October 13, 2010, 10:35pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/17 "2010-10-13T22:35:30Z")
Thanks for sharing your knoweldge with us steve 🙂 Copypasta to hard drive! ---
**Author:** ![P51Mustang](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/p51mustang/32/1266_2.png) [@P51Mustang](https://pheromonetalk.com/u/P51Mustang)\ **Post date:** [October 13, 2010, 11:05pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/18 "2010-10-13T23:05:52Z")
CK you already breathe it in everytime you apply lol ---
**Author:** ![Olfact\_Amorous](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/olfact_amorous/32/434_2.png) [@Olfact\_Amorous](https://pheromonetalk.com/u/Olfact_Amorous)\ **Post date:** [October 13, 2010, 11:10pm UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/19 "2010-10-13T23:10:18Z")
> [@P51Mustang](#): > > CK you already breathe it in everytime you apply lol And the Oxymoronic statement is founded by P51 🙂 ---
**Author:** ![Wentworth](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/wentworth/32/936_2.png) [@Wentworth](https://pheromonetalk.com/u/Wentworth)\ **Post date:** [October 14, 2010, 1:56am UTC](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595/20 "2010-10-14T01:56:22Z")
THANK YOU, STEVE. I was genuinely upset when I found out it wasn’t going to be in the store anymore. [Next page](https://pheromonetalk.com/t/how-to-properly-make-icm-mx301/42595.md?page=2)