# Lowering mcg per spray?

**URL:** <https://pheromonetalk.com/t/lowering-mcg-per-spray/10485>\
**Category:** Men's Pheromone Advice & Field Reports\
**Created:** [March 27, 2008, 12:04am UTC](https://pheromonetalk.com/t/lowering-mcg-per-spray/10485 "2008-03-27T00:04:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dominic](https://avatars.discourse-cdn.com/v4/letter/d/13edae/32.png) [@Dominic](https://pheromonetalk.com/u/Dominic)\
**Post date:** [March 27, 2008, 12:04am UTC](https://pheromonetalk.com/t/lowering-mcg-per-spray/10485/1 "2008-03-27T00:04:52Z")

</div>

I wanted to add different tones to mixes but slightly. Could i add water or alchohol to a bottle and not dilute the [pheromones](https://a314.com/)? If it does dilute it would there be any other way to do this? Ex. Half ammo half water equals 50/50 ammo right?

---

<div class="post-metadata">

**Author:** ![shalifi](https://avatars.discourse-cdn.com/v4/letter/s/cc9497/32.png) [@shalifi](https://pheromonetalk.com/u/shalifi)\
**Post date:** [March 27, 2008, 4:05am UTC](https://pheromonetalk.com/t/lowering-mcg-per-spray/10485/2 "2008-03-27T04:05:46Z")

</div>

While yes, a water/ammo mix would be 50/50, but I’m a little confused. You say you don’t want to dilute it, but you want to lower the mu/spray. This is diluting the solution.

I’m not quite sure why you would want to dilute it though. One spray at the regular dosage is already a relatively small amount. It may work or it may not, but if I were you I don’t think I would want to do anything to it considering you may ruin it.

If you absolutely sure you want to try I would at least suggest putting some of the ammo into a different container and diluting that one, so if you mess up you don’t ruin your whole supply. P.S. Don’t use water, the spray-ons are an alcohol base, so use alcohol to dilute.

---

<div class="post-metadata">

**Author:** ![mockingbird](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/mockingbird/32/1790_2.png) [@mockingbird](https://pheromonetalk.com/u/mockingbird)\
**Post date:** [March 27, 2008, 5:21am UTC](https://pheromonetalk.com/t/lowering-mcg-per-spray/10485/3 "2008-03-27T05:21:16Z")

</div>

You can’t add water to a product and not dilute the pheromones concentration, but only the scent, if this is what you are asking.

An alternative is to get product with higher concentration at the beginning, ordering ammo double strenght for example, and add same amount of water to it (50/50), so the scent will be cut down, but the strenght will be the same as the regular one.

If the scent is not an issue, then I don’t know the reason you want to “add water/alcohol but not dilute the pheromones”

---

<div class="post-metadata">

**Author:** ![galydrum](https://sea2.discourse-cdn.com/flex016/user_avatar/pheromonetalk.com/galydrum/32/5181_2.png) [@galydrum](https://pheromonetalk.com/u/galydrum)\
**Post date:** [March 27, 2008, 7:33pm UTC](https://pheromonetalk.com/t/lowering-mcg-per-spray/10485/4 "2008-03-27T19:33:23Z")

</div>

Just get unscented AMMO2X and dilute 50/50 with whatever cologne you like. If you like the AMMO scent but just want it less strong, then get the regular AMMO2X and dilute that 50/50. Personally, I find it a bit odd that “Unscented” ends up being more expensive than regular 2X, but it’s a really small gripe. Might be because there is extra lab work.

Whatever you do, use only the purest alcohol you can find to dilute. Next to perfumer’s alcohol, Everclear works the best, if you can get it. If you can’t get any of that, I have heard of people using vodka.