# Mixing batches

**URL:** <https://pheromonetalk.com/t/mixing-batches/50549>\
**Category:** Men's Pheromone Advice & Field Reports\
**Created:** [June 1, 2011, 4:34pm UTC](https://pheromonetalk.com/t/mixing-batches/50549 "2011-06-01T16:34:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![hercs63](https://avatars.discourse-cdn.com/v4/letter/h/8c91f0/32.png) [@hercs63](https://pheromonetalk.com/u/hercs63)\
**Post date:** [June 1, 2011, 4:34pm UTC](https://pheromonetalk.com/t/mixing-batches/50549/1 "2011-06-01T16:34:13Z")

</div>

Hi All

Not been here for a while, but just want some quick advice, not sure whether this has been mentioned before.

I have a couple of bottles of [Ammo](https://a314.com/product/ammo/), like 2x 1/2 bottles of the FF21 formula, however the batches no on the bottom of the bottles are different, would the phermo still be ok if I was to mix the batches together so that i will only have 1 full bottle instead of 2x 1/2 bottles ???

Secondly, these were made last year so not sure whether this would make any difference.

As this will save me a bit of space on my shelf.

---

<div class="post-metadata">

**Author:** ![SteveO](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@SteveO](https://pheromonetalk.com/u/SteveO)\
**Post date:** [June 1, 2011, 7:11pm UTC](https://pheromonetalk.com/t/mixing-batches/50549/2 "2011-06-01T19:11:00Z")

</div>

I’m not sure what the official response of the company would be, but as for me personally I do it. As long as they are the same strength I don’t see much of a big issue with it. I’ve done it with three or four bottles too, like when you have a little bit in each one.

---

<div class="post-metadata">

**Author:** ![hercs63](https://avatars.discourse-cdn.com/v4/letter/h/8c91f0/32.png) [@hercs63](https://pheromonetalk.com/u/hercs63)\
**Post date:** [June 2, 2011, 12:38pm UTC](https://pheromonetalk.com/t/mixing-batches/50549/3 "2011-06-02T12:38:56Z")

</div>

tnx for the advice.

---

<div class="post-metadata">

**Author:** ![SteveO](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@SteveO](https://pheromonetalk.com/u/SteveO)\
**Post date:** [June 2, 2011, 1:52pm UTC](https://pheromonetalk.com/t/mixing-batches/50549/4 "2011-06-02T13:52:26Z")

</div>

Also, I forgot to mention, is that I keep a log of the lot numbers I mixed together, just in case. This way if anything remarkable happens I can report back and perhaps get them to research and notice any differences between the lots that might be made into a future lot. So far its never happened but I’m thorough like that 🙂