It will be all about Dwight after Kobe retires in two years. For now, it’s still Kobe’s team! Gotta love the addition of Dwight and Nash thou, Lakers 2013 NBA Champs!
While not allowed in commercial instances for obvious reasons, you can substitute Perfumers Alcohol with grain alcohol like Vodka or even everclear. It works very well and has been used for hundreds of years before government regulatory agencies decided they knew what was best for us.
Another form of alcohol that can be used with decent results is methyl alcohol. One of the biggest issues you will have in obtaining any alcohol is it can used in bomb making so just use discretion and don’t draw attention to yourself. Besides its better to use gasoline in bombs anyway. Add about a cup of dry powdered laundry detergent (Tide works best) to about a cup of gasoline and you’ve just made yourself Napalm. Uh wait a second, disregard that, this is the wrong forum again::o
I wouldn’t trust most UK market vodka personally - Much of it is utter crap with all sorts of extra ingredients. We tend to like it sweetened and flavoured here. 
In fact most of the brands come out of the same industrial still in Glasgow! Imported quality vodka is different of course but that would cost more than importing PA! I have never seen Everclear in the UK.
I used to have a nice compact still at work but ditched it when the compliance for the new licensing/drug precursor regs was revised a few years back.
I have wondered about Methyl Alcohol - That used to be pretty easy for individuals to obtain in small quantities. Pharmacies and the like.
Personally I would go for some finely divided polystyrene in any napalm like brew I was making - nice and sticky! 
Interesting! I think I’ll try that out! Er… the Everclear… not the Napalm. Of course not!
But yes, how did I have such a large brain fart? I use Everclear when I make simple perfumes, of course it would work with mones, I don’t know how I didn’t realize that!
How good a mix is A1 with Shine in a Togo?
My last mix was with IH at 25mcg, one spray, and I’ll be doing the same.
Results were good… maybe a bit too Beta. Needing a more upbeat vibe, and also possibly a little combatant to the depressive effect.
Any possible downsides to this mix?
I want to make a 10mcg/spray in a 5ml bottle, so will mix 0.4ml A1 with 4.6ml PA. How much of the PA should I cut with DPG to make it last for 6-8 hours?
Alternatively, could I add 0.4ml into a 4.6ml bottle of Ammo (I only use one spray, so no A1 overdose) without problems? I am looking at this because I am having trouble finding information on how much dpg to use.
I like your thinking and your journey into the unknown. Going to make you a Reporting User. Congratulations 
Just an FYI and I hope it is not against the forum rules. I believe the cheapest place to buy Perfumers Alcohol on the internet is here (Saveonscents):
16oz for $11.09
32oz for $23.11
I hope this helps.
Consumer Line: AMMO, A314, Instant Shine, Instant Openness, Instant Honesty, Turn Up the heat, Instant Gentleman, Instant Jerk, Come Talk To Me Mix 2, A1
MX Series: MX297, MX301, MX330, MX412, Project UF, Project UF2, Project UF2.5
Putatives: P75, P78, P83, P86, P91, P93, P96, P114, P130
Experimones: P74, P79, TAC, TAA
About to order some myself want to make the oil but might just use the PA. Think this will work well with p83 and p75?
Personally I found A1/P75 ineffective, it still needed a social in there to diffuse the P75 edginess properly.
P83 won’t go wrong in there but it won’t moderate either.
Would this be a suitable mix for hanging out with a bunch of friends (non-bar setting, just chilling in the house, drinking)? I’ve been trying to incorporate MX413/A1 for a while now.
MX413 x 2 sprays
P75 2.5mcg x 1 spray
Summer Ammo x 1 spray
another great thread. sub.
My calculations are different.
I measured the 20 drops of A1 with syringe. Тhey were exactly 0.5ml .
10ml(10000mcg) A1 contains about 400 drops.
There are about 25mcgs of A-1 per drop.
I use 24drops / 0.6ml of A1 + 3.2ml PA = 20mcgs per spray
(for : Nuclear Fallout: Building a Pheremone WMD )
They would be - You used a syringe. K-Train used the standard dropper that comes with the LS bottle, which does give fairly large drops. Your syringe looks to give a much smaller drop size.
I used the standard dropper that comes with the LS bottle too. I just removed the piston of syringe. And I drip the drops into the syringe.
(I have read in LS-forum, that 10ml A1 bottle contains about 400 drops).
That’s overcomplicating things - Get some measuring pipettes and deal with an exact volume. Its much simpler.
bumping a really old thread. I’m curious for anyone who reads this, I found A-1 at lovescents. But now I can’t find the perfume alcohol at androtics. Anyone know how i can make this happen?
See Post #148 of this thread. I am not affiliated with that company in any way, just happened to stumble into them. You can also order a 30 ml bottle in the Mixing supplies section of Androtics and have them fill it with a diluent that they have available. Enjoy.
Consumer Line: AMMO, A314, Instant Shine, Instant Openness, Instant Honesty, Turn Up the heat, Instant Gentleman, Instant Jerk, Come Talk To Me Mix 2, A1
MX Series: MX297, MX301, MX330, MX412, Project UF, Project UF2, Project UF2.5
Putatives: P75, P78, P83, P86, P91, P93, P96, P102, P114, P130
Experimones: P74, P79, TAC, TAA, TAF
What ratio of PA/DPG can be used to make it last longer? Or, is this not recommended?
For time fixing, its just a few drops, OTOH around 5 in a togo and up to 20 in a 30ml. But it also depends on the other molecules in the mix as too much will hamper them,
Some past threads on mixing with DPG but if you use cologne, it will usually have enough diffusion regulation already. PA will need scenting anyway.