Went to club and this bartender that is bi that I have talked about in my journal. So I got my eyes from her at first and chated for a few mins. then it was like she avoided me, did not happen with my attraction mix before?
2nd place same thing ran into a girl that was into me before gave me a few mins of convo. and touching than avoided me the rest of night but did get a hug and kiss from her {not on the lips} when she was heading out?
The guys tonight gave me the same good respect as before.
This mix works Ok and not for me. My attraction mix that I have been working on works great and never a bad night with that on. So I am giving Mix 292 a break again.
I am 30 and should handle the none well in the mix at 2 sprays I have used 3 sprays before and Didn’t have this ghost effect like tonight.
I forgot to say that this Blonde girl that is out all the time and I chat with said that she felt like an old person because she was having an hot flash and then left outside for some fresh air then came back inside.
Next time I do feel like playing with this mix I will go and use 1 spray and see what happens. I Don’t want to give up on this mix but it has not worked better than my trusted and not done attraction mix!
I must say, it has been a VERY long time since I received any major hits with MX292. The first time I tried MX292 (Batch #6) I had a very good hit where this girl turned and stared into my eyes forever and she smiled. Batch #6 seemed to work okay for me.
Lately I have been playing with MX292 (Batch #7, Batch #9) and I have received no significant hits at all. I kind of noticed better hits when I mixed MX292 with Instant Jerk, but MX292 by itself has let me down lately.
Has anybody here experienced any good resuts with Batch #7 or Batch #9 of MX292 by itself???
I am a huge fan of MX 292 (batch# 9) but I think that it needs a cover scent. I have had some good hits but last night I just had my 292 and IS on and not my GIT and I only got one hit later in the night.
OMG did I just complain that I only got 1 hit…WT..I went from getting no hits for a year to getting some awesome hit in my expirement phase and 1 hit is not good enough…haha
I must admit that I have lost interest in testing my MX292 (batch 2) in favor of the Raw Power test pack. Way too little for me from MX292 and way too much from MX305-10.
Are all your targets strangers in clubs and pubs? I got very little from MX292 in terms of attraction around people who aren’t familiar with me (I don’t know what the reason for that is) but when I use it around girls that are already familiar with me it really is something else. I would say use Ammo for the first 2-3 dates and then bring the MX292 out. There’s no need to use it all the time because the attraction seems to live on for a long time afterwards. Duration of effects? I’m still getting hits 2 weeks later haha. Better to rotate between ammo and MX292 imo. 4 dates ammo to every 1 date MX292.
The bartender 6 months
The girl from second place went to school and party with her in the past.
The blonde 4 months always a hug and even getting a grab to hold hands but that is when I have my Attraction mix on.
This past week I had 2 good hits with it on but nobody I knew?
Well I have been testing my Attraction mix out a lot and just started to play with mix292 again this past week more than before so that was fresh. I give mix292 a go here and there, but I get better results with my attraction mix!
Not to say Mix292 never worked but not as good as my mix I have been playing with. After that night I don’t know what to think.
Hey Catload you like to test If you have what goes into the Attraction mix you want to give it a go? It is Taa, P86, P93, P79, TUTH for the none.
I have batch 9, I’ve only tried it twice but got absolutely no reaction from it.
In defense, I will say that I did not do my standard “start slow” routine. I’ve got blind testing coming up and I’m laying off the pheros until they show up, but I couldn’t wait to try out the MX292.
First try, the reported “magic mix”, three sprays MX292 and two sprays Instant Shine. Nothing, zip, nada. No reaction from my wife or strangers that couldn’t be chalked up to Shine alone.
Second try, had been told that sometimes if MX292 doesn’t seem to be working, a shot of -none product “wakes it up”. So…three sprays MX292 to neck, one heavy spray TUTH to chest/neck. No Shine this time. Absolute flop. Other than smelling good (I like the game scent, now to try Akuto!) I got nothing.
So the MX292 batch #9 is going on the shelf until after the blind testing. I feel it deserves more experimentation by my usual testing methods, but I couldn’t resist trying out the two reported “best hits” combos. Everyone’s different, it may be that MX292 does nothing for me. I need to get some Ammo and try that out sometime.
I think Mark in Dallas knows the individual molecules and the mcg of each. I read a post of his that said do not go above 3-4 sprays. My theory for that is because it contains TAH.
I know everyone on this thread is saying what batch number they have, but I highly doubt MX292 differs much from batch to batch. Just a thought. I don’t mean to upset anyone by my comment. I currently have 4 MX292’s, and am still on my first one and I don’t really bother looking at batch numbers.
Androtics uses highly expensive and sophisticated equipment when making pheromone mixes, and the accuracy from batch to batch probably is fairly constant.
I started with three than went down to two with IFM I don’t think that the IFM would mess with the mix.
I am going to give it a go at one spray than back at three and even maybe four to really see what’s going on. Three did work in the past, but that night it felt like I had OD for sure.
The whole batch thing surrounding MX292 is because the unpredicted social hits the mix was getting caused a few people to scratch there heads and wonder if MX292 was really MX292 and not some other MX that had been put in the wrong bottle by mistake. Turns out MX292 is MX292 and therefore all batches should for all intents and purposes be the same.
I’m pretty sure that Androtics has some pretty state-of-the-art equipment, and I’m not saying that the batch mix itself differs from batch to batch. However, sometimes they do switch suppliers, and the quality of product from one supplier to another may vary, so I figure putting in the batch number during a report of something that “used to work but now doesn’t” could be useful to them.
I am completely laying off the MX292 until a later date when I can give it the devotion it deserves. I basically tried the two magic mixes, and they don’t work for me in the dose and application points that I tried. So I need to find my sweet spot for MX292, then maybe the magic will happen for me.
Hey txironhead, some times taking a break from something and coming back to it helps to see what it does better sometimes. Brings it in a new light so to speak.
I see you are a newer member heading all in and that is great, like I did. As you get to know what does what you can really use these pheros to the fullest. Like me here I have hit a bump and it doesn’t fit to other tests that I have done with the mix. I am still learning everyday!
I myself use my Attracion mix most of the time and try other things when I am in the mood for ? I look at my Phero’s and say ok lets go with this. You have to fit the Phero’s to make them work the best for you.
Have fun playing with phero’s txironhead and see you around bud!
I want to believe that there is no difference between batch numbers, but the fact remains that all of my best MX292 hits came from 3 sprays of Batch #6. I tried 3 sprays with Batch #7 and Batch #9 and I noticed NOTHING at all…in fact, it was like all the babes treated me like the invisible man or something!
I really wonder if putting batch #'s on the vials was a great idea to begin with and is not creating a placebo effect.
I have been using AD products for a long time and their quality assurance is superb and I seriously doubt they have made that many mistakes from one batch to another.
I don’t mean to upset anyone by my comment. I currently have 4 MX292’s, and am still on my first one and I don’t really bother looking at batch numbers.