Is it possible to mail AD my cologne like Aqua di Gio or Cool Water and get the mones I order mixed in there?
Maybe. Depends on what they say.
It’s true, Neroli is good by itself but is light enough to be covered by whatever cologne you want… Many people do this on the forum here.
You could always mix them yourself.
Hey John, I was looking at the fragrances available for purchase as a stand alone. Any way to the the FF21-22 or is that strictly for Ammo and the MX series?
Word. I was under the impression that you could use the same method to dilute other products as you would with A1, copulins, etc. using either perfumer’s alcohol or cologne. If I was mistaken, I apologize.
I wouldn’t recommend this with any of the mixes because as John indicated you screw up the ratio of pheromones to carrier and then you dont know how much your using.
If your making your own mixes then its easy enough to buy single molecule putatives and experimones to do this with you just need to get it in a high enough dosage so that when you dilute it you have the dosage per spray your looking for. There are quite a few posts showing you how to figure this out just do a search. I also suggest getting it in light neroli so that the binder is already there. Neroli is a good fixative. Neroli blends well with anything and is often used in perfumery to bind and diffuse.
People have been making very successful mixes this way here for a long time. However I wouldn’t recommend this either unless you have a lot of experience with the molecules and you have already tested and reported on them well.
Layering really is the best option for a few reasons. It gives you more control. It is more versatile because you can change around what your using everyday. (once you mix it your stuck with it) Dosage is more precise.
I know people find this method of layering hard for when they are going out and want to bring there pheromones.
Another way to do this without going into to much mixing is get yourself a empty to-go bottle. Open it up. Line up the spray nozzle of the bottle of the product your using with the openning of the empty to go and spray your application right into the new bottle. Be sure its clean.
So suppose you layer 3 spray of TUTH, 2 spray of P83, 2 sprays of P93 and 5 sprays of IO but you dont want to take all this with you. Spray your dosage into the empty to-go bottle for each one and you have your mix to take with you for the night. Be sure to shake gently right before you apply.
Tisha
Wow, really cool tip. So even though we’re mixing the molecules together, the mcg of each pheromone will still come out correctly? So if we “spray” mixed 20 mcg/spray of p93 and 30 mcg/spray p83 INTO a ToGo then will each spray OUT of the ToGo be 20 mcg/spray of p93 and 30 mcg/spray of p83?
Yes, but remember if thats what you would normally layer and what you spray into the empty bottle you have to use all of whats in the bottle to get the correct dosage. This method is more for just bringing one dose of all the products your wearing with you so you can refresh later if needed without dragging around tons of bottles.
Tisha
I had an empty to-go bottle around, so I used a dropper and took the top off of both my IS and my IG bottle. I carefully put the drops into the to-go bottle. I usually wear 2 IG with 2 IS, so I put in about 50 drops of each. I don’t like carrying around two 30ml glass bottles, so hopefully I can just use this togo bottle!
Exactly…Like when going out in NYC through subways, taxis etc… it’s nice to just have ONE ToGo in my pocket!