So I have a Togo of P75 at 12.5mcg and also a Togo at 37.5mcg.
I have a dropper and I am looking to use an empty Togo bottle to dilute this potent pheromone. I have a large bottle of mx297 and was thinking of diluting the p75 but by what ratio? Alternatively I have some colognes I could mix with instead. I have never diluted before so looking for any advice.
Easiest would be to dilute it with your cologne of choice. For 6.25mcg you need to cut it in half, so fill the togo halfway with P75 and the other half with cologne. For 4.16mcg fill the togo 1/3 with P75 and 2/3 cologne. Easy. Make sure you label it so you know what you did.
I wouldnt mix the MX297 in with the p75 in the togo. Dilute the p75 with cologne and if you want to use MX297 just spray in on separately. Good luck.
Have you done some tests at those higher dosages? If so please post them.
What I would do is get a 30 ml bottle. Mark the top-line of the liquid in the to-go w/ a pen. Pour liquid from to-go into 30-ml. Fill to-go w/ scented PA to the marking line and then pour that into the 30 ml, to dillute by however many parts you want to divide it by. Up to 5 parts PA and 1 part concentrate. If feel this method would be a bit more accurate than trying to guestimate how much is 1/2 or 1/3 of a to-go bottle. A lot of people prob. guess wrong.
So the 12.5 mcgs you could get down to 2.083 mcgs, for ex. or 1.0417 at a half-spray.
You could then put some of your diluted mix back into the empty to go if you wanted, though I’d say shake it up a few days first before using.
Another thing you could try is cutting them in half by standing one to-go right next to the other and eyeballing that they are at the same level after you pour it over.
Then mark the line and dillute from there as I described above. So that would give yo down to 1.0417, or 0.5208 half-sprays.
I don’t think I would use an MX to cut it unless I was going to end up with less than 1 mcg P75 / spray, since any higher I think P75 is the only thing that is going to come though.