ICM 0.25.1a testing

[bosshank]

Myself: Mid-40s, athletic, married

Products:
SteveO’s ICM 0.25.1a mix
3 sprays to the neck area from a To Go bottle

for the ingredients see the following thread:

link is from deleted thread

What Happened:

I have small batches of both the ICM 0.25.1a and ICM 0.25.1b mixes but do not really have the opportunity to test them much. Recently I did and here is what happened with the ICM 0.25.1a mix …

My wife and I are out for the evening. We have a nice dinner and go to a fairly nice place - not loud - people do come in and out - but a fun place for us.

We are sitting there enjoying ourselves. I can tell Mrs. BH is enjoying the evening out, the ambiance, music, glass of wine (hopefully the company ) and I am just kinda zoning out letting her have a nice time.

OK - this one is for the guys - learn from me here - just when you think everything is going well and you can zone out - don’t. Always keep that radar up and going …

Back to the story: Next thing I know Mrs. BH leans over to me and whispers with a half growl: “That woman is making eyes at you.”

Bwap Bwap Bwap. Battle Stations. Red Alert. Danger Will Robinson Danger.

Fortunately I am able to give and honest and convincing reply of “What woman?” as I start scanning the area with what is probably a slight look of concern or confusion on my face. There are only two girls anywhere nearby and they are sitting two seats away from Mrs. BH. I noticed them coming in - cute, but they did not even look 21 because I wondered how they got in when I saw them arrive. So I think to myself “No way - there’s not many but there are a few guys around much closer to their age - maybe someone in back of me.” But once I start paying attention, sure enough the one closest is making very direct and flirty eye contact with me when she thinks Mrs. BH is not looking. Now Mrs. BH was pretending to not notice her, but trust me … I know what that smile means.

OK you younger girls - this one is for you - don’t ever think you can flirt with a guy who is out with his GF/LTR/wife and she does not notice it no matter how under wraps you think it is. I think they are always looking for something like that …

Back to the story again: So once I realize it, I am half laughing and half amazed thinking: “Girl, first, who do you think the woman is right beside me with the big shiny rings and second, I am old enough to be your dad.” But she kept it up. And all the time Mrs. Bh is sitting there with that smile … I think that scared me more than anything.

Finally I have to go the restroom. I have to go right by them to do so. Trip in is uneventful. Trip back, well, just as I am 2-3 steps away from her she stands up, turns 270 dgerees to face me dead on standing right in my way to “straighten” her dress a little while looking me dead in the eyes. I just lock my eyes on my wife, stutter step around her - which was not easy - not much room the way she had place herself - and sat down back in my seat.

Mrs. BH: “Like that was an accident.” I decided that silence with a slight eyebrow shrug was the best reply. So far Mrs. BH was not upset with me about any of this but I did not want to open mouth and insert foot and thus change the designated target of those lazers that can shoot out of an angry wife’s eyes.

Finally the two girls got tired of nothing happening and left.

But the one sure did try hard for a while … and with my wife right there.

ICM 0.25.1a: Some powerful stuff …

[Adam_Alpha]

Woohoo, excellent story, bosshank!

[M_M]

Always a pleasure, Boss!

I don’t even wear my .25.1a anymore 'cause it cost lots to make and it’s veeeeeeeeery special to me. I have two very special brews and they’re both just sitting for special occassions.

SteveO did a good job there … I’m so glad that NBULLY79 helped me with the math part of the mix, to own such a brew.

[bosshank]

Yes - it is a little expensive to mix up - kinda why I used it for a special evening out with the wife.

The math part of these mixes still make my head spin … I remember someone post a mix table to help but I never got it to work. I understand Dancing Joker has a very good one but is not ready to post it.

[mark-in-dallas]

Well it’s about damn time you finally got around to playing with the ICM’s Boss!

It is expensive to make, but it’s a pretty powerful mix. I think you’ll like the 1b even better for use aound your wife. Another mix that works excellent is to mix the two, with a tad heavier dose of the 1b than 1a. Or you can wear the 1a mix and add about 50 to 75 mcg’s of P83.

And, just wait till you get a chance to test FPPX2!

BTW, the easiest way to mix the ICM’s is to get all the molecules at 30 mcg’s and just swap ml’s for mcg’s. So, to make the 1a mix you would add 5 ml’s each of None, BetaNol, TAC, and P74, 4 ml’s of TAA and 3 ml’s of P93.

[mockingbird]

Good post bosshank! Both versions of Icm with none and tac have been pretty good for me! (i hate to mention the mix by code since it confuse me haha ) And keep us updated about future experiments!

Great advices mark! It was ur that i follow to make those icm

From your test mark, is fppx radically different than icm, or just much improved based on the same results/ingredients?

[mark-in-dallas]

I’m told that FPPX2 is a completely different mix and ingredient structure than the ICM’s. So far, I’ve only tested with FPPX2 three times and don’t know that I’ve found my sweet spot yet, but what I’m seeing is that it has all the impact of the 1a mix, but is far better at drawing women to you. I will be posting a report from last nights results using the oil based mix in my journal a little while.

[denec]

Great story!!

I have not used ICM mixes as well, saving it for those times I really know I can use it!

I would give you reps but says I cannot

[Eslite119]

@mark-in-dallas

Well it’s about damn time you finally got around to playing with the ICM’s Boss!

It is expensive to make, but it’s a pretty powerful mix. I think you’ll like the 1b even better for use aound your wife. Another mix that works excellent is to mix the two, with a tad heavier dose of the 1b than 1a. Or you can wear the 1a mix and add about 50 to 75 mcg’s of P83.

And, just wait till you get a chance to test FPPX2!

BTW, the easiest way to mix the ICM’s is to get all the molecules at 30 mcg’s and just swap ml’s for mcg’s. So, to make the 1a mix you would add 5 ml’s each of None, BetaNol, TAC, and P74, 4 ml’s of TAA and 3 ml’s of P93.

I was reading over some ICM reports and referred back to the original post about the ingredients. Turns out that I have all the ingredients needed to make the mix . But I don’t know how I’m gonna mix them with all the molecules in different MCGs. Wish I had all of them in 30mcgs like you said Mark, then it’d be much easier.

[mockingbird]

@Eslite119

I was reading over some ICM reports and referred back to the original post about the ingredients. Turns out that I have all the ingredients needed to make the mix . But I don’t know how I’m gonna mix them with all the molecules in different MCGs. Wish I had all of them in 30mcgs like you said Mark, then it’d be much easier.

Just pm me with the mcg of each and desired total volume, ill try to figure out a weaker more dilute version for you. But u just need to spray more

[M_M]

@mark-in-dallas

BTW, the easiest way to mix the ICM’s is to get all the molecules at 30 mcg’s and just swap ml’s for mcg’s. So, to make the 1a mix you would add 5 ml’s each of None, BetaNol, TAC, and P74, 4 ml’s of TAA and 3 ml’s of P93.

I love it when people make math simple! Looks like the exact math NBully planned out for me.

[mark-in-dallas]

@mockingbird

Just pm me with the mcg of each and desired total volume, ill try to figure out a weaker more dilute version for you. But u just need to spray more

Ditto here. My original mix consisted or something like 187 sprays and took 4 sprays to equal 1 spray of SteveO’s mix. But, it is doable!

[Eslite119]

This is what I have to make the mix:

TAA 10 MCG per spray
TAC 10 MCG
P83 15 MCG
P74 10 MCG
Beta -Androstenol 5 MCG
P93 7.5 MCG
-none 2.5 MCG (this and alpha came with Pheroproof)
Alpha -Androstenol 2.5 MCG

With a tip from Mockingbird, I decided to try and mix 0.25.1a and here’s what I did:

In a togo bottle, I mixed

2 sprays of TAA
5 sprays of Beta -nol
2 sprays of P93
2.5 sprays of p74
10 sprays of -none
2.5 sprays of TAC

AND my finger slipped and I spilled everything on the floor.

But I did mix it and about to test it during my free time this weekend. Now, how many sprays do I need to be equivalent to one spray of the original? I’m guessing two???

[SteveO]

@Eslite119

AND my finger slipped and I spilled everything on the floor.

But I did mix it and about to test it during my free time this weekend. Now, how many sprays do I need to be equivalent to one spray of the original? I’m guessing two???

Oh my . I hate when that happens to me!!!

My very good forum friends help me at math myself so I couldn’t tell yah. I’m sure one of the awesome PheroFolk will slide on by and help out though.

[mark-in-dallas]

@Eslite119

In a togo bottle, I mixed

2 sprays of TAA
5 sprays of Beta -Androstenol
2 sprays of P93
2.5 sprays of p74
10 sprays of -none
2.5 sprays of TAC

It will take between 4 and 5 sprays of your mix to approximate 1 spray of SteveO’s mix. It breaks down as follows:

Uou used a total of 24 sprays in your mix to achieve phero content levels of 20 mcg’s of TAA, 25 mcg’s of BetaNol, 15 mcg’s of P93, 25 mcg’s of P74, 25 mcg’s of None, and 25 mcg’s of TAC, or a total phero content of 135 mcg’s. You can then take the 24 sprays and divide it into 135 to find that you will get a total per spray dosing of 5.625 mcg’s of pheros per spray.

Now to find the per molecule dosing per spray you divide the total mcg level used of each molecule by total number of sprays (24). I.E., To find the per spray volume of TAA you take the 20 mcg’s of TAA and divide by the 24 sprays total, to find that you get a per spray volume of .08333 mcg’s. You have a per spray volume of .0625 mcg’s of P93, 1.0416 mcg’s of TAA, TAC, BetaNol and None, and .08333 mcg’s of P74.

[Eslite119]

@SteveO

Oh my . I hate when that happens to me!!!

Yep. I fell to the floor and started crying. JK.

@mark-in-dallas

It will take between 4 and 5 sprays of your mix to approximate 1 spray of SteveO’s mix. It breaks down as follows:Uou used a total of 24 sprays in your mix to achieve phero content levels of 20 mcg’s of TAA, 25 mcg’s of BetaNol, 15 mcg’s of P93, 25 mcg’s of P74, 25 mcg’s of None, and 25 mcg’s of TAC, or a total phero content of 135 mcg’s. You can then take the 24 sprays and divide it into 135 to find that you will get a total per spray dosing of 5.625 mcg’s of pheros per spray.

Now to find the per molecule dosing per spray you divide the total mcg level used of each molecule by total number of sprays (24). I.E., To find the per spray volume of TAA you take the 20 mcg’s of TAA and divide by the 24 sprays total, to find that you get a per spray volume of .08333 mcg’s. You have a per spray volume of .0625 mcg’s of P93, 1.0416 mcg’s of TAA, TAC, BetaNol and None, and .08333 mcg’s of P74.

And I thought this was going to be difficult. Thank you so much Mark for breaking this down for me. So 4 spray (equivalent to 1 spray) it is… for my first try.

[mark-in-dallas]

Anytime Eslite.

[bosshank]

@mark-in-dallas

Well it’s about damn time you finally got around to playing with the ICM’s Boss!

I had To Gos of both 1a and 1b - I actually posted results from some earlier tests - but due to how special the mixes are I do not pull it out often …

@mark-in-dallas

I think you’ll like the 1b even better for use around your wife. Another mix that works excellent is to mix the two, with a tad heavier dose of the 1b than 1a. Or you can wear the 1a mix and add about 50 to 75 mcg’s of P83.

I actually have another post to make on an afternoon out with 1b - bascially a cute young waitress would not leave our table … I read about that in your journal - I ought to give it a try sometime …

@mark-in-dallas

And, just wait till you get a chance to test FPPX2!

That should be fun …

@mark-in-dallas

BTW, the easiest way to mix the ICM’s is to get all the molecules at 30 mcg’s and just swap ml’s for mcg’s. So, to make the 1a mix you would add 5 ml’s each of None, BetaNol, TAC, and P74, 4 ml’s of TAA and 3 ml’s of P93.

Thanks for the hint. I am about to place a BIG order and plan to do just that …

[examine]

cant wait to get my hands on this one…

winks at steveo LOL

[M_M]

@mark-in-dallas

BTW, the easiest way to mix the ICM’s is to get all the molecules at 30 mcg’s and just swap ml’s for mcg’s. So, to make the 1a mix you would add 5 ml’s each of None, BetaNol, TAC, and P74, 4 ml’s of TAA and 3 ml’s of P93.

And how many mcgs per spray will the give of each, MarkinD?

-None -
BNol -
TAC -
P74 -
TAA -
P93 -

Thanks!